Makes precise placement easy.

The CAD MG120 is a superior low-noise, electret, condenser, cardioid, mini-gooseneck microphone. The MG120 microphone has a wide, flat frequency response which provides unsurpassed, natural, transparent sound quality, and warm sound when used close to the sound source. The cardioid pickup pattern minimizes annoying feedback when the mic is used close to sound reinforcement speakers and monitors, and reduces the pickup of unwanted off-axis sounds. The CAD MG120 includes an internal gooseneck stiffener and has an approximate overall length of 20".

Requires phantom power.

CAD MG120 Condenser Microphone Specifications:

• Generating Element: Electret Condenser (Phantom Powered)
• Polar Pattern: Unidirectional (Cardioid)
• Frequency Response: 40Hz - 20kHz
• Output Level: Power Level: -46dB (0 dB - 1 mW per 10 microbars)
• Open Circuit Voltage: -68dB (0 dB = 1 volt per microbar) 4 mV/Pascal
• Impedance: Low (150 ohms nominal)
• Dynamic Range: 100dB
• Equivalent Noise Level: Less than 30dB, A weighted
• Maximum SPL: 130dB (1% THD, open circuit)
• Powering: Supply Voltage: 9 - 52 Vdc, positive pins 2 & 3 reverse polarity protected
• Current Required: Less than 2.0 mA over operating voltage range
• Phasing: Positive Pressure on Diaphragm generates a positive voltage on pin 2 relative to pin 3

CAD MG120 Condenser Microphone Features:

• Electret condenser
• Cardioid pattern
• Mini gooseneck
• Wide, flat frequence response
• Natural, transparent sound
• Warm sound when placed close to sound source
• Gooseneck has internal stiffener
• 20" gooseneck length

Order today and have this handy and versatile mic ready for your next project.